custom design gift for women

burlap throw pillow covers

HOME: custom design gift for women > burlap throw pillow covers >

burlap throw pillow covers How to Sew a Duvet Cover – Stripes or Solids funny cushion covers

Updated: 2020-03-30 01:12 Author: admin Views: 80 Font Size: LMS

A duvet cover is the most practical bedding solution for families, pet owners, and those who like to eat potato chips in bed. Seriously, what’s with the potato chips in bed? Sewing your own duvet cover can be a costly and cumbersome feat but with these tricks you can create perfectly unique and prudent custom bedding.

The easiest way to make a duvet cover is to simply sew together two flat sheets, one for the front and one for theback. But we wanted a bit more pizzazz. We cut up and sewed together small amounts of designer fabric with multiple flat sheets in different colors and patterns to make our striped duvet.

personalized baby blankets

We’ve provided two ways for you to assemble your desired duvet. As you can see by the chart below, these large dimensions require some creative fabric piecing. For our queen-size duvet cover, we created a striped panel to make the front, and a solid panel to make the back. Of course you can make both sides stripedburlap throw pillow covers, or solid. The choice is yours!

MaterialsFor the striped side: Three 1 yard (91 cm) cuts of coordinating fabric, for the stripesFabric, in a solid color (for amount see the chart)For the solid side: Fabric, in a solid color (for amount see the chart)RulerRotary CutterCutting MatScissorsStraight pinsSewing machineCoordinating thread?–1? yards (46 cm–137 cm) of ?”; (12 mm) hook and looptape that’s not adhesive-backed (the amount you need depends on bed size)

InstructionsTo create a striped front side:The front of the duvet cover requires three, 1 yard (91 cm) cuts of coordinating fabric, plus two pieces of 44″;- or 52″;- (112 cm- or 132 cm-) wide fabric at least as long as your required bed width, plus 1″; (2.5 cm) seam allowance (see the Duvet Cover Fabric Chart).

1 To make the stripes, use the ruler, rotary cutter, and cutting mat to cut each of the three yards of fabric into thirds. Each will yield three pieces (nine total) measuring slightly less than 44″; × 12″; (112 cm × 30.5 cm).

2 Place two strips of the same fabric, right sides together. Sew along one short side with a ?”; (12 mm) seam. Sew the remaining strip of the same fabric to the opposite short side to make one very long strip measuring 132″; × 12″; (335 cm × 30.5 cm). Finish the seams using your preferred method (see Finished Seam Solutions). Repeat these steps with the remaining two fabrics. You will have a total of three long sewn strips.

3 Arrange the three sewn strips from top to bottom as you’d like them to appear on the duvet. If you have spare length, it looks nice to stagger the seams so that they are intentionally not aligned, as shown. and sew the strips together along their long sides with a ?”; (12 mm) seam. Finish the seams using your preferred method.

4 To finish the front side of this queen-sized duvet, cut one 93″; × 36″; (236 cm × 91 cm) piece and one 93″; × 44″; (236 cm × 112 cm) piece from the solid fabric. Using a ?”; (12 mm) seam, sew the 95″; × 36″; (241 cm × 91 cm) piece to the top of the striped block and sew 95″; × 44″; (241cm × 112 cm) piece to the bottom, long sides together. Finish the seams using your preferred method.

5 Set the front side of your duvet cover aside.

To create a solid back side:The back of the duvet cover requires two (for crib, twin, or full) or three (for queen or king) pieces of 44″; or 52″; (112 cm or 132 cm) wide fabric at least as long as the length of your required fabric (see the Duvet Cover Fabric Chart.)

1 If making a crib, twin or full duvet, cut two pieces of fabric to the correct length. Leave one piece wholeand cut the second one in half, the long way down the center.

2 Align and pin the long side of one narrow piece to one long side of the center piece, and sew with a ?”; (12 mm) seam. Repeat this process to sew the second narrow piece to the other long side of the center piece. Finish the seams using your preferred method

3 If making a queen or king duvet, cut three lengths of fabric to the correct length. Align and pin the long sides of two of these pieces together and sew with a ?”; (12 mm) seam. Repeat this process to sew on the third pieceof fabric. Finish the seams using your preferred method

Assembly instructions1 Refer to the Duvet Cover Fabric Chart to trim the front and back pieces of your duvet cover to the correct size. Set the back piece aside.

2 Place the front piece wrong side up. Fold and press the bottom edge of the fabric to the wrong side by ?”; (6 mm). Then fold and press the bottom edge again by an additional ?”; (6 mm). Sew the hem at the inside foldededge.

3 Place the front piece wrong side up again. Fold the bottom hemmed edge 8″; (20 cm) to the fabric’s wrong side. Cut the hook and loop tape into 4″; (10 cm) lengths. Separate the hook sides of the tapes from the loop sides. a length of the loop-side tape every 4″; (10 cm) across bottom edge of the folded flap of fabric. (Be sure to pin through only one layer of fabric.)

4 Unfold the 8″; (20 cm) flap. Sew around all edges of the loop tape strips backstitching at the start and finish tosecure the stitches. Fold the 8″; (20 cm) flap back up, pin it, and set it aside.

5 Place the back piece of your duvet cover wrong side up. Fold and press the bottom edge of fabric to the wrong side by ?”; (12 mm). Then fold and press the bottom edge again by an additional 1″; (2.5 cm). Sew the hem at the inside folded edge.

6 Finish the duvet with French seams. the front and back pieces of the duvet cover together with wrong sides facing and the bottom, hemmed edges aligned.

7 Sew down both sides and across the top with a ?”; (6 mm) seam. Trim the seams. Leave the bottom,hemmed edge open.

8 Turn the duvet inside out (so the right sides of the fabric are facing each other). To finish your Frenchseams, sew down both sides and across the top with a ?”; (12 mm) seam. Leave the bottom open.

9 Turn the duvet cover right side out. Position the hooksides of the tape opposite each loop strip sewn to the front of the duvet cover. Sew around all edges of the hook tape strips, backstitching to secure the ends of your stitching. Add a decorative × from corner to corner, if desired.

First of all, let’s clear up the term ‘vegan.’ A lot of people think it’s just a short form of ‘vegetarian’ – someone whose diet consists primarily of plant-derived foods, although some also eat eggs and milk products (lacto-ovo vegetarians), but no actual animal flesh.

You’re going to love this tutorial! I’m going to show you how to paint on fabric with regular acrylic paint! I have been wanting to try painting on simple cotton flour sack kitchen towels for a while and I didn’t realize that I could use regular acrylic paint on fabric. I was also eager to use a mixture of blue paints for a classic look.?I was thrilled to find out I could! I made the cutest farm style kitchen flour sack towels that will also make the best gifts!?? These were very very simple after a trial and error.

Related ArticlesRelated Articles

  • personalized photo gifts for her

    2020-04-27

    I hope that you’;re enjoying stitching along with the “;Block of the Month”; series here on the Polka Dot Chair! ?Today I thought I’;d share with you a few more quilt bloc...

  • customized gifts for her More Han

    2020-04-27

    Last week I shared with you guys a ?doll that I made for my sister’;s little girl for Christmas, today I thought I’;d share with you the dolls I made for her boys. But first- my siste...

  • personalized photo gifts for her

    2020-04-27

    The truth about the effects of toxic chemicals in our everyday lives is getting more mainstream media attention now than ever. Just last week, Time magazine published a list of ten common household t...

  • personalized photo gifts for her

    2020-04-26

    Recently I designed a fabric line featuring bunnies.? So many people have created cute projects using the line, that I thought I’;d share some of my favorites with you today. I’;m als...

Welcome To custom design gift for women